Differences

This shows you the differences between two versions of the page.

--- mypower24:plantcontrol:troubleshooting [2025/03/12 12:45] – admin
+++ mypower24:plantcontrol:troubleshooting [2025/03/20 10:01] (current) – [Unable to change device parameters] admin
@@ Line 3: / Line 3: @@
  examples provided to resolve your problems efficiently.
-===== Updating device parameter =====
+===== Setting device parameters =====
-=== Unable to set device enable ===
+==== Unable to change device parameters ====
   * **Possible Causes:**
-    - device serial number contains invalid characters.
+    - Device serial number contains invalid characters.
   * **Solutions:**
-    - Enable Wi-Fi on your device.
+    - The device needs to be removed from plant control, then removed from the logger's interfaces in "My Devices" => "Logger myPower" => "Intefaces". Once it has been removed from the interface, go to the "Installed Devices" tab and remove the offline device from there. Reboot the logger add the device to the interface again.
+    - If prompted for a serial number type only **valid characters[a-z A-Z 0-9 _ -]. No white spaces allowed.**
+    - Click scan.